Busway is a new type of conductor formed by taking copper or aluminum as conductor, using non olefinic insulation support, and then installing it into the metal trough. The current capacity is large and the electrical and mechanical properties are good. In addition, the metal trough is used as the shell, so it is non combustible, safe and reliable, and has a long service life. Compared with traditional power distribution, the area occupied by the equipment is significantly reduced, and the appearance is beautiful. It is very beneficial for the construction and power distribution of large buildings. To sum up, the busway has the following characteristics: 1. The current capacity can be large; 2. The voltage drop is very small; 3. Strong short-circuit load capacity; 4. High reliability and long service life; 5. High safety; 6. The equipment of the distribution system can be added or changed freely; 7. Small overall size; 8. Lightweight and easy to operate; 9. The connection is very simple, with joints such as tees and elbows connecting each other into a system; 10. Simple construction and inspection; 11. With modern aesthetics. This busway product has a relatively long service life and can be used in rated voltages up to 380V and 50Hz AC, making it widely used in three-phase four wire and three-phase five wire circuit configurations.

Busway is divided according to its purpose. It has straight feeder, that is to say, plug-in hole and plug-in hole. There is also a type of flange end, and there is a combination of variable volume or expansion. According to the insulation method, the insulation materials of busway generally include mica, pouring, polyester film and epoxy resin. According to the material of the shell, one is made of steel and the other is made of aluminum alloy.

The epoxy resin vulcanized busway produced by Mega Technology has waterproof and dust-proof capacity. The busway under power is immersed in a fish tank, and the water enters the insulated conductors from all angles of the buaway. The power is still normal, and the fish are still alive! With high pressure resistance and fire resistance.Under a flame (1300 ℃) roasting for 10 seconds, the insulation layer is not damaged and the heat is dissipated in an extremely short time, without any problems with skin contact! Strong resistance to oxidation and salt spray. Sulfide coating will completely eliminate contact with air on the conductor, and after 1800 hours of salt spray testing, the insulation layer will never be damaged. Has super strong toughness and strength, and has the ability to withstand cold and hot cycling damage.